Multi-Function 8-Port DMX RGB LED controller

Combined DMX RGB Combined Controller/Dimmer.

CTR-8000B/C/D DMX Controller.

Working mode: SD card.

The controller can work with 16 files, 8 out ports, can take 1024 pixels.

Output Signal: DMX512/1990.

Input Voltage: AC110V-240V.

Power: 3W

(For Mid to Large Size Projects).

Product features:
1. 32 to 65536 degree Gray control, Gamma correction procession handle.
2. Support various point, line light source, and all kinds of rules and specific shaped handle
3. The controller has eight ports output, each port can support up to 512/1024 lights (DMX lights can support up to 512 pixels)
4. The playback content stored in SD card, the SD card can store up to 32 files, SD card capacity supports 128MB-32GB
5. The controller can single set use, also multiple controllers cascade, cascade optical isolation mode: interference, better stability, cascade distance between two controllers can reach up to 150 meters, need to use 0.5M2 pure copper power cord.
6. The controller support chip can lock the support IC in software, or not lock the support IC in the software, select the support IC through the controller CHIP button, this scheme is more flexible and convenient.
7. For the DMX lighting IC, the controller comes with write address function; In addition, with use of 2016 Led Edit-K V3.26 or later edition can make one key write address function setting
8. Support load lamp is 4 channels (RGBW) pixels, or split into single channel point pixels
9. Enhanced 485 TTL and 485 differential (DMX) signal output

10. The controller comes with the test effects as follows: 1 red, green, blue and black jump; 2 red, green, blue and black gradient; 3 red, green, blue.